Autopage RF-350 rs Руководство по установке и эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Автомобильная сигнализация Autopage RF-350 rs. Autopage RF-350 rs 17 страниц. Professional vehicle security system with keyless entry

Печатать страницу

ALARM FEATURE "C" PROGRAMMING:

1. Turn the Ignition 'switch 'ON/OFF' 3 TIMES and stay in OFF position.

2. Push the Valet switch 7 times and hold on the 7

chirps with a long chirp is heard then release the valet switch. You are

now in the Alarm feature 'C' programming mode.

3. Press and hold the transmitter

shock sensor program mode.

Press

One Chirp /

Transmitter

LED one pulse

Button

Factory Default Setting

ADJUST AND TEST THE SENSITIVITY LEVEL OF THE SHOCK

SENSOR

1. Turn the Ignition switch 'ON/OFF' 3 TIMES and stay in OFF position.

2. Push the Valet switch7 times holding in on the7th push. Three chirps

with a long chirp will be heard. Release the valet switch. You are now

in the Alarm feature 'Shock Sensor' programming mode.

3. Press and hold

indicate the unit is ready to accept adjustments of the shock sensor.

4. Press

button on the transmitter once. This will decrease sensitivity

level by one. Each time the button is pushed and a decrease is made

the siren/horn chirp will respond with [1] chirp. Two chirps indicate the

minimum sensitivity. Warn away & full trigger will be deleted when

minimum sensitivity is selected. Shock sensor OFF

5. Press

button on the transmitter once. This will increase sensitivity

level by one. Each time an increase is made the siren/horn chirp will

respond with [1] chirp. Two chirps indicate the maximum sensitivity.

6. Hit the bumper or strong metal part of the vehicle to test the threshold

level of the sensor.

a). Activate the warn-away (first stage the shock sensor), the siren will

emit a short chirp.

b). Activate the full alarm (second stage the shock sensor), the siren

will emit a long chirp.

7. When you are satisfied with the setting, press the

the adjustment. One long siren chirp will indicate the unit has locked in

the adjustment.

Note: If 30 seconds of inactivity expires or you turn ON the ignition during

of above steps, the unit will exit the program mode and return to the

disarmed mode. Three long chirps will confirm exit.

button for two seconds to enter

button for 2 seconds. One long siren chirp will

push until Three

Two Chirps /

LED two pulse

Shock Sensor Program Mode

button to lock in