Autopage RF-503 Руководство по эксплуатации - Страница 12
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Автомобильная сигнализация Autopage RF-503. Autopage RF-503 16 страниц. Remote transmitters
Также для Autopage RF-503: Руководство (2 страниц)
Печатать страницуAP4000DX
The AP4000DX is a full four watt paging system. The signal is received from a handsome belt-clip
paging receiver indicating your RF-503 has been triggered, even if you cannot hear the siren.
RS-32 Dual Stage Perimeter Protection Sensor
The RS-32 utilizes microwave technology that emits dual protective fields. The easy and separate
adjustment of the exterior and interior fields, allows the RF-700 to be armed and provide maximum
protection in convertible vehicles parked with the top down, and equally good protection in enclosed
vehicles.
SIS-10 Air Movement Sensor
The SIS-10 super low frequency vibration sensor has successfully integrated an electret electrostatic
transducer and a low pass filter, creating a new and cost effective air movement sensor. If installed in a
closed vehicle, any movement of air inside the vehicle, for example, opening a door, will trigger the
sensor. Applications of the SIS-10 are limitless. It will be ideal to monitor a vehicle's doors, trunk or
hatch, an RV, a closed cabin on a vessel, and so on. The SIS-10 can also replace glass breakage
sensors. The advantage is that a single SIS-10 can cover all doors, rear hatch, windows, and sunroof,
even if there is no pin switch.
AC-68 Power Window Module
The AC-68 power window control module can control the up or down motion of two windows, or one
window and a sunroof. (*)
(*) Vehicle must be equipped with power windows, and/or power operated sunroof.
RK-1 Relay Kit
A pre-wired relay and socket for starter interrupt, and other optional functions of the
RF-503 requiring a relay for operation.
XT-57
Additional/Replacement remote control transmitter.
12