High Tech IVC-45L Руководство - Страница 6

Просмотреть онлайн или скачать pdf Руководство для Пылесос High Tech IVC-45L. High Tech IVC-45L 12 страниц. Industrial vacuum cleaner

3.2.4 Filter barrel

The filter element barrel is mainly composed of a filter element device. Due to the

adsorption

effect of the filter element, the dust in the air will be adsorbed on the surface of the

filter element when passing through the filter element device or fall on the lock

mechanism of filter barrel due to gravity.

Due to the adsorption effect of the filter element, it will absorb too much dust

and affect the efficiency of filtration. Therefore, a cleaning device is installed on the

filter barrel. The dust cleaning device can clean the dust adsorbed on the filter element

and improve the filtering efficiency.Operation mode of cleaning device: manual

blowing.

To lock the rear wheel, press the brake pad "ON" with foot to achieve the brake

function.

If you want to unlock the locking rear wheel, press the brake pad "OFF" with foot

to unlock it.

The following sections describe the vacuum cleaner at different locations during

operation, the main operation, and how to install the longopac dust bag.

Note:

Vacuum cleaners can only be used or repaired by personnel who have received

the necessary theoretical and practical training and have carefully read the user

manual.

Wear protective equipment such as protective gloves, protective masks, overalls,

helmets, insulated shoes, etc. when operating the vacuum cleaner.

The vacuum cleaner can only be used and moved on a horizontal surface.There is

a risk of squeezing and crushing when the wheels roll, so pay more attention.

Check the minimum recommended cable area before using the extension cable.

You can find the recommended cable area on the technical data.

To use the vacuum cleaner, press the machine, pull out the spring pin in limiting

device on frame, lift the machine to the highest position, and then insert the spring pin

inside the corresponding hole.