Emerson E2 Руководство по установке и эксплуатации - Страница 15

Figure 5-2 - Alarm List Screen

If the alarm list is empty, "System Normal - No

Alarms" is displayed.

To see a detailed status of an advisory, select the ad-

visory in the list and touch the magnifying glass

(details icon) and the Advisory Detail screen for that

advisory will open. Touch the bell (advisory)

icon again to place that advisory on the Home screen.

5.2.1. Advisory Detail Screen

Advisory Details shows expanded information about

the selected advisory:

Figure 5-3 - Advisory Detail Screen

• Current alarm number with the total number of

alarms in the alarm list

• Alarm summary for single alarm

Time stamp, alarm ID string, associated property,

data point information, current status, why the alarm

was triggered (for example, if a case temp limit was

exceeded) the configured priority of the advisory, Re-

turn-To-Normal information, and if available, the

limit that was exceeded.

5.3. Data Points Screen

The Data Points screen is a view-only screen that

shows the list of all data points being monitored by

the FSD.

Figure 5-4 - Data Points Screen

In Figure 5-4, the Data Points screen name is dis-

played across the top of the screen (in this example, it

is called Case Temperature - State). This name is

configured under the Status Title parameter under

FSD General Setup in the E2 controller (Figure 6-1).

When a data point is selected on the Data Points

screen (Figure 5-4) and the details icon

touched, all details about the pointer will be displayed

such as notice, alarm (Figure 5-6), and override

(Figure 5-7) status information when these values are

active:

FSD Screen Navigation • 9