Dynastream Innovations AMP 231 Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Измерительные приборы Dynastream Innovations AMP 231. Dynastream Innovations AMP 231 17 страниц. Activity monitoring system

Печатать страницу

Display

The LCD display can be set to ON or OFF to enable or hide viewing of data during a trial.

Viewable data includes the elapsed time since start of trial, number of steps, caloric

expenditure, distance travelled, locomotion speed, and current time. If the Display setting is

turned off, only the elapsed time (ELAP) and current time (CLOCK) screens are available.

Elapsed time is displayed in hours, minutes and seconds (hh:mm:ss) until ten hours; after

ten hours, elapsed time is displayed in days and hours (0D10).

Sleep Mode

During a trial, the LCD goes into sleep mode after five minutes without a button press. From

sleep mode, the first button press will simply "wake up" the monitor; the press will not be

recognized as UP/DOWN/BACK/OK. If a trial is not running, the pod will shut down after

five minutes without a button press.

Trial

Use the TRIAL mode to gather activity data. The pod records the elapsed time since start of

trial, number of steps, energy expenditure, distance, and speed. Initially elapsed time is

displayed in hours, minutes and seconds (hh:mm:ss); after ten hours elapsed time is

displayed in days and hours (0D10). The pod also records the amount of time spent in each

of three activity classes (Inactive, Active, and Locomotion). Activity-class data is available in

the downloaded *.csv file.

Start Trial

Use START to begin a monitoring session. The device must be properly configured (see

SETUP mode) before starting a trial. Starting a session with the Display setting turned on

makes the session data available for viewing; use the toggle buttons to scroll through data

types. If the Display setting is turned off, only the elapsed time (ELAP) and current time

(CLOCK) screens are available.