Autopilot APCECOD Руководство - Страница 6

Просмотреть онлайн или скачать pdf Руководство для Контроллер Autopilot APCECOD. Autopilot APCECOD 17 страниц. Deluxe digital co2 controller

Page 5

Factory Settings

The APCECOD comes pre-programmed with factory settings.

These settings may be adjusted by the user. For best results

verify any changes after adjusting settings. The controller can be

easily reset to factory settings. (see below)

CO2 PPM setting

CO2 dead-band

Calibrate CO2 PPM

CO2 Function

CO2 Mode

Fuzzy Logic

Reset Factory Settings - Press and hold the Enter / Reset and

down buttons for 3 seconds. The display will read f.Set. Press the

Enter/reset button again to restore the factory default settings.

The unit will go through a self-test and when the factory reset is

complete, the unit will say

The individual push-

buttons on the

APCECOD makes

changing settings EASY.

* Press a button, the

display shows the current

setting.

* To change the settings,

use the UP and DOWN

buttons.

* Then press ENTER to

accept the new setting.

1250 PPM

50 PPM

380 PPM

Daytime

Increase

(Off) Generator mode

donE.

APCECOD