High-End Technology Flying Wing Руководство - Страница 3

Просмотреть онлайн или скачать pdf Руководство для Игрушка High-End Technology Flying Wing. High-End Technology Flying Wing 8 страниц.

Glue first one side of the wing joiner with 5 minute

epoxy.

Lay the wing on a cardboard tube or broomstick

With the bottom side up to let the epoxuy cure.

Sand the inside of the fin

Check the alignment of the wings. Lay the wing

With the bottom side up , Then glue the wings

together. With 5 or 30 minute epoxy.

Sand th edges , and if necessary, trim the front and

back of the stub on th fuselage by 4-5 mm

Tape the edges with masking tape. An then glue the

Fin on the fuselage with 5 minute epoxy . us a clamp

To hold the fin in place. When the epoxy cures.