Autopot AUTO3XL6.6GALNT Простые правила ухода - Страница 2
Просмотреть онлайн или скачать pdf Простые правила ухода для Газонное и садовое оборудование Autopot AUTO3XL6.6GALNT. Autopot AUTO3XL6.6GALNT 2 страницы. Aquavalve
Auto3 XL SmartPot contents
• 1x Auto 9 XL tray, lid & access cover
• 1x AQUAvalve
• 1x AQUAvalve cover
• 1x ¼ top hat grommet
3
• 4ft length of ¼ piping
• 3x 5 gallon SmartPot
• 3x PotSock Round
Pot and Tray Dimensions
45"
Required Reservoir Capacity
Auto3 XL
1x Auto3 XL
2x Auto3 XL
System Size
FlexiTank or
FlexiTank
FlexiTank
FlexiTank Pro
13 Gal
/ Pro 25 Gal
Capacity
•
Pot up your plants, water through, then allow your plants to establish in the pots for a period of 7 to 10 days before
turning your system on. This will encourage a stronger and healthier root system.
•
Always raise your reservoir to a minimum of 150mm above the highest AQUAvalve and re-fill the reservoir when
there is approximately a 1/3 of the solution left - NEVER ALLOW THE RESERVOIR TO RUN EMPTY.
•
For best results, we recommend mineral fertilisers. Do not use liquid organic fertilisers, as they have a tendency to
block small pipe work.
•
Clean all substrate from the bottom and sides of the pots before placing in each tray. This will ensure your system
is clean from the start.
•
Always use free draining substrates, for example: soil/perlite, coco/perlite, soil/clay pebbles, coco/clay pebbles,
rockwool/clay pebbles.
[email protected] I www.autopot-usa.com I +(1) 702 338 0373
Auto3 XL contents
• 1x Auto 9 XL tray, lid & access cover
• 1x AQUAvalve
• 1x AQUAvalve cover
• 1x ¼ top hat grommet
3
• 4ft length of ¼ piping
• 3x 6.6 gallon XL solid pot
• 3x root control disc
11"
13"
5 gal
6.6 gal
SmartPot
pot
10.4"
4.7"
Included with
Included with
Auto3 XL SmartPot
Auto3 XL
FlexiTank and FlexiTank Pro are the only collapsible reservoirs
that AutoPot recommend for use with Auto3 XL Tray Systems.
A minimum 13 gallon reservoir is required per unit.
4x Auto3 XL
8x Auto3 XL
10x Auto3 XL
FlexiTank
FlexiTank /
FlexiTank
/ Pro 60 Gal
Pro 105 Gal
200 Gal
Advice
Auto3 XL SmartPot Setup
3
1a
Fit the PotSock Round over
the base of each SmartPot
2a
Fill SmartPot with
medium and pot
up plants.
Water through pot
and allow to drain
outside the tray.
Common to both:
3
Push ¼" top hat grommet
into the port in the tray wall.
Thread ¼" pipe into the tray
through the grommet.
5
Cut ¼" pipe to
appropriate length.
Connect via ¼" /
½" fittings to a filter
(not included).
Connect filter to reservoir.
Leave tap off.
7
Remove any slack from ¼"
pipe by drawing excess
pipe out of the tray.
Ensure that the circular
spirit level indicates
the tray is level,
adjust if required.
Allow your plants to establish for 7-10 days before turning system on
Advice
If you require any guidance email - [email protected]
Auto3 XL Setup
3
1b
Place circular root
control disc gold face
down in the pot.
2b
Fill pot with medium and
pot up plants.
Water through pot and
allow to drain outside
the tray.
4
Remove AQUAvalve collar.
Push ¼" pipe through
collar and attach to
AQUAvalve nozzle.
Rescrew collar - DON'T
overturn... when you
feel it grip STOP.
6
Place AQUAvalve cover
over the AQUAvalve.
The AQUAvalve and
cover should be placed
directly onto the tray.
8
Make sure the
system is clean and
free of debris.
Place the lid on top
of the tray. Insert the
pots. Place the access
cover over the valve.