AUTOPRO BD1208 Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Blu-ray плеер AUTOPRO BD1208. AUTOPRO BD1208 12 страниц.
Печатать страницу
Features
·Full high-definition video playback at up to 1080p resolution for an amazing viewing experience.
·Up-conversion of standard definition DVDs for enhanced picture quality at up to
1080p over a HDMI connection.
·Rich multi-channel surrounds sound.
·Simple installation using a single HDMI cable (cable not included)
·Multiple outputs for connecting your home theater system or amplifier.
·Picture in Picture functionality that lets you display primary and secondary video at the same time.
(When supported by the Blu-ray Disc)
·Pop-up menu display without interrupting playback (When supported by the
·Blu-ray Disc)
·HDMI 1080p/60Hz output (Blu-ray Discs only) that provides smooth playback of video with a
frame rate of up to 60 frames per second (TV must be connected with a HDMI cable and be
compatible with 1080p 60Hz)
Package Contents
Before installing your new Blu-Ray Player please ensure that you have received all the
following items:
·Blu-Ray Player
·Remote Control
·AV cable
·User Manual
Start up guide
Before you set up your new Blu-Ray Player please position it on a flat stable surface within reach
of your TV connection. To connect your Blu-Ray Player please follow the below instructions:
1. Connect your Blu-Ray Player to your TV. You have two options to do this. You can use HDMI for
the best possible connection, or composite. When connecting your Blu-Ray Player with
composite please ensure that you match the coloured ends on both the
Blu-Ray Player and your TV.
2. Plug the Blu-Ray Player into power and turn it on.
3. Insert battery into the remote.
4. Change the input on your TV to the corresponding input you used in step 2.
e.g. AV1 or HDMI1.
3
startup is slow. This is not a defect.
If your player is connected to the TV with an HDMI cable, startup is slow. This
is not a defect.
Problem: When reading a disc, the disc tray opens
Solution: Make sure that the disc is not dirty.
The disc may be incompatible with your player. Try another disc.
Reset your player.
Problem: Audio or video pause during playback
Solution: Make sure that the disc is not dirty.
Reset your player.
Problem: The player is on and the logo and menu appear, but there is no image
from the disc.
Solution: Make sure that the disc is not dirty.
Reset your player.
Problem: The player freezes when reading a disc.
Solution: Reset your player. When you see loading on the screen, press (open/close) to
open thedisc tray and remove the disc. Clean the disc and try the disc again.
If your player freezes again, the disc may contain some content that is not compatible
with your player. Do no try playing the disc with your player.
TV Screen and Video:
Problem: Video does not appear on the TV screen or the picture is distorted
Solution: Make sure that the TV is connected to the correct jacks on the back
of your player.
Make sure that the TV is set to the correct video input source.
The TV may be in screen saver mode. Check the documentation that came with
the TV for instructions about waking your TV.
Reset your player.
Problem: Video is not output in high definition
Solution: High definition video cannot be output through the VIDEO OUT jack.
You must connect the TV to your player using the COMPONENT OUT jacks or HDMI jack.
Make sure that the correct HDMI or component video resolution has been selected in the
Setup menu.Depending on the Blu-ray Disc, output from the COMPONENT VIDEO OUT
jacks may be restricted to 480p.
Problem: The 4:3 aspect ratio picture expands left and right or the picture size is incorrect.
Solution: Use the TV to change the aspect ratio. See the documentation that came with the TV.
When using a component video cable, set TV Aspect to 4:3 Pan & Scan.
Problem: There is no apparent change in the picture quality when the picture
settings are changed in the Setup menu
Solution: Depending on the video type, changes may not be apparent.
20