Dynatech TD10000Q Инструкции пользователя - Страница 17
Просмотреть онлайн или скачать pdf Инструкции пользователя для Усилитель Dynatech TD10000Q. Dynatech TD10000Q 19 страниц.
Печатать страницу
AMPLIFIER
SPECIFICATIONS
General
Number of channels
Peak total output both channels driven
Peak output voltage per channel
Max. output current per channel
General
Max. Output Power
Per ch. (both ch.'s driven)
Bridged per ch.
Performance with Gain: 35 dB and VPL: 195 V
THD 20 Hz - 20 KHz for 1 W
THD at 1 KHz and 1 dB below clipping
Signal To Noise Ratio
Channel separation (Crosstalk) at 1 KHz
Frequency response (1 W into 8 ohms) +0/-3 dB
Input impedance
Input Common Mode Rejection, CMR
Output impedance @ 100 Hz
Voltage Peak Limiter (VPL), max. peak output
VPL, selectable per ch.
VPL, selectable when bridged
Voltage Peak Limiter mode (per ch.)
Gain and Level
Amplifier gain selectable (all channels)
– rear-panel switches
Default gain
Connectors and Switches
Input connectors (per ch.)
Output connectors (per ch.)
Output bridge mode
Cooling
Front-panel indicators:
Common
Per channel
Power
Minimum power-up voltage, 220 V / 110 V
Power Average Limiter (PAL）
Soft start / Inrush Current Draw
Dimensions (H×W×D)
Weight
Rack Space
TD10000Q
4
8800 W
141 V
35.5 A peak
2 ohms
2200 W
Not recommended
<0.1%
<0.05%
>112 dBA
>70 dB
6.8 Hz - 34 KHz
20 KOhm
50 dB
30 mOhm
141, 118, 100, 85, 71, 59, 50, 42 V
282, 236, 200, 170, 142, 118, 100, 84 V
Hard / Soft
23, 26, 29, 32, 35, 38, 41, 44 dB
35 dB
3-pin, electronically balanced
Neutrik Speakon
A+B and/or C+D, inputs A and C are input source
Two fans, front-to-rear airflow, temperature controlled speed
Power Average Limiter (PAL); Power on Signal present / High-impedance;
-20dB, -15dB, -10dB and -4 dB output signal; Voltage Peak Limiter (VPL);
Current Peak Limiter (CPL); Very High Frequency (VHF); High Temperature;
Fault; Mute
190 V / 95 V
Yes
Yes / max. 5 A
88 x 483 x 443mm
12.5kg
2U
4 ohms
8 ohms
2100 W
1250 W
4600 W
4200 W
16 ohms
625 W
2500 W
16