DYNATEK ARC-2 Руководство

Просмотреть онлайн или скачать pdf Руководство для Аксессуары для мотоциклов DYNATEK ARC-2. DYNATEK ARC-2 10 страниц.

Печатать страницу

Asynchronous Restriking CDI – 2 channel

Specifications

Operating Voltage:

Operating Current:

Max Operating RPM:

Ambient Temp range:

Ignition inputs:

Ignition outputs:

Ignition output energy:

Ignition output Voltage:

WARNING: DO NOT INSTALL THIS ON A VEHICLE ALREADY EQUIPPED WITH A CAPACITIVE DISCHARGE IGNI-

NOTE : YOU MUST ALSO PURCHASE AN INSTALL KIT. THERE ARE MODEL SPECIFIC KITS FOR CERTAIN VE-

HICLES, OR GENERIC INSTALL KITS. FOR EASIEST INSTALL, USE A MODEL SPECIFIC KIT, AS THIS WILL HAVE

BEEN TESTED ON YOUR VEHICLE, AND INCLUDE BRACKETS, HARNESSES, SETUP INSTRUCTIONS, AND

OTHER ITEMS TO MAKE INSTALL AS TROUBLE FREE AS POSSIBLE. GENERIC KITS INCLUDE A STANDARD

HARNESS, AND MAY REQUIRE BRACKET FABRICATION, AS WELL AS SPLICING THE HARNESS INTO THE VE-

NOTE: SOME VEHICLES HAVE IGNITION COILS THAT ARE NOT COMPATIBLE WITH CDI STYLE IGNITIONS.

Dynatek 164 S. Valencia St. Glendora CA, 91741

8-20V

7A@10,000 RPM

18,000 RPM

Min: Below -40C

Max: +90 C

2, rising or falling edge selectable

2 independent channels capable of

asynchronous operation

189+ mJ per channel

500+ Volts

HICLES STOCK HARNESS.

Restrike window:

Max number of sparks

per sequence:

Launch limiter range:

Launch limiter input:

Timing Retard:

Timing Retard input:

Tach output:

Recommended power fuse:

Dimensions:

Weight:

TION.

2801211a

Parts List

ARC-2 module

Decals

Power Cable

Fuse

25 degrees, up to 3500 RPM

3000-11900 RPM

Single wire, ground to activate

10 degrees user activated

Single wire, ground to activate

0-12V square wave, 50% duty cycle,

Standard 4 cylinder configuration,

30A ATC Blade

4.1"x4.6"x1.5"

1.5 lbs

www.dynaonline.com

Installation Guide- 1