autoright C900145 Руководство - Страница 4

Просмотреть онлайн или скачать pdf Руководство для Сандер autoright C900145. autoright C900145 16 страниц. Random orbital polisher

Печатать страницу

SERVICE

1. Tool service must be performed only by

qualified repair personnel. Service or

maintenance performed by unqualified

personnel may result in a risk of injury.

2. Accessories must be rated for at least the

speed recommended on the tool warning

label.

Important!: Do not operate the polisher

until you have inspected each part. If any

part is missing or damaged, do not use it.

Return the polisher to the place of purchase.

See WARRANTY.

READ AND FOLLOW ALL SAFEGUARDS

Like other power tools, polishers are safe

when properly used but can be dangerous

if misused. It is the responsibility of the user

to read and understand all instructions,

IMPORTANT SAFEGUARDS, and safety

precautions before operating the unit and to

use the unit properly. Failure to do so may

result in product damage, personal injury

or loss of life.

Do not try to repair (or disassemble) the

unit yourself. Repairs should be performed

by a qualified shop familiar with this unit

or returned to AutoRight (See warranty).

This unit is to be used with authorized parts

only. When using parts that do not comply

with the manufacturer's specifications and

safety devices, the user assumes all risks

and liabilities.

ENGLISH

IMPORTANT SAFEGUARDS

SERVICING A DOUBLE-INSULATED

PRODUCT

In a double-insulated product, two systems

of insulation are provided instead of

grounding. No grounding means is provided

on a double-insulated product, nor should

a means of grounding be added to the

product. Servicing of a double-insulated

product requires extreme care and

knowledge of the system and should only

be done by qualified service personnel.

Replacement parts for a double-insulated

product must be identical to those parts in

the product.

EXTENSION CORDS

Make sure your extension cord is UL/

ETL/CSA listed and is in good condition.

When using an extension cord, be sure to

use one heavy enough for the current - for

lengths less than 18 feet, use a No. 18 AWG.

or heavier; for lengths more than 18 feet,

use No. 16 AWG. If in doubt, use a heavier

gauge. An undersized cord will cause a

drop in line voltage resulting in loss of power

and overheating.

STORAGE

Make sure unit is clean and dry before

storing. Store in a dry location. To prevent

damage, the electrical cord should not be

crimped during storage.