Highland HP6IFC-2 Руководство по эксплуатации и уходу - Страница 10
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и уходу для Варочная панель Highland HP6IFC-2. Highland HP6IFC-2 20 страниц. Induction ceramic hob
Печатать страницу
To stop the cooking time:
Action
Select the Timer
Stop the time
If several timers are activated, repeat the process.
Egg timer function :
Egg timer is an independent function. It stops as soon as a heating zone starts up.
If the egg timer is on and the hob is switched off, the timer continues until time runs out.
Action
Activate the hob
Select the Timer
Decrease the time
Increase the time
After a few seconds, the [ min ] display stops with blinking.
The time is confirmed and the timer starts.
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer display blinks [ 000 ] and a sound rings.
To stop the sound and the blinking, press the key [ - ] and [ + ].
Automatic cooking
All the cooking zones are equipped with an automatic cooking device. The cooking zone starts at
full power for a certain time, and will then reduce automatically the power on the pre-selected
level.
Start-up :
Action
Power level selection
(for example « 7 »)
Switching off the automatic cooking :
Action
Power level selection
Stop&Go function
This function stops all the hob's cooking temporarily and then allows restarting with the same
settings.
Start up/stop the pause function :
Action
Engage pause
Stop the pause
Control panel
press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
press key [ - ] from the timer
Control panel
press display [ 0/I ]
press simultaneously key [ - ] and [ + ] [ 000 ]
from the timer
press key [ - ] from the timer
press key [ + ] from the timer
Control panel
slide on the "SLIDER" to [ 7 ]
and hold 3s
Control panel
slide on the "SLIDER"
Control panel
press [ II ]
press [ II ]
Press on the animated "slider"
10
Display
[ 000 ]
Display
[ 0 ]
[ 60 ] to 59, 58...
Time increase
Display
[ 7 ] is blinking with [ A ]
Display
[ 0 ] to [ 9 ]
Display
[ II ] and control light on
"Slider" animated
previous settings