Adept Audio AMP200 Руководство по установке - Страница 9

Просмотреть онлайн или скачать pdf Руководство по установке для Динамики Adept Audio AMP200. Adept Audio AMP200 20 страниц. Landscape speaker system

Running the speaker cables

Run the left and right speaker cables from the amplifier to the subwoofer

location. (See Diagram 2 on page 10)

From the subwoofer location, extend the left speaker cable to the left

satellite speakers and the right speaker cable to the right satellite speak-

ers using a parallel connection. Strip ½" of the jacket off the ends of all

cables, and connect the LEFT positive conductor from the amp, to the

LEFT input (WHITE is Positive / GREEN is Minus) on the subwoofer,

extend from the subwoofer to the first LEFT satellite speaker and

connect the LEFT + to the RED wire and the LEFT – to the BLACK

wire on the 1st LEFT satellite speaker. Extend to the 2nd LEFT satellite

speaker in the same manner Repeat this process if using additional

satellite speakers on the LEFT channel (MAX of 4 satellites on each

channel). Connect speakers and subwoofer using only the supplied

waterproof wire nuts. (See Diagram 1 below)

Connect the RIGHT positive conductor from the amp, to the RIGHT

input (RED is Positive / BLACK is Minus) on the subwoofer, extend from

the subwoofer to the first RIGHT satellite speaker and connect the

RIGHT + to the RED wire and the RIGHT – to the BLACK wire on the

1st RIGHT satellite speaker. Extend to the 2nd RIGHT satellite speaker

in the same manner. Repeat this process if using additional satellite

speakers on the RIGHT channel (MAX of 4 satellites on each channel).

Connect speakers and subwoofer using only the supplied waterproof

wire nuts. (See Diagram 1 below)

Diagrams 3 and 4 (pages 12 & 13) show alternate wiring options.

Make absolutely sure you always connect positive to positive and

negative to negative. And be sure to connect right and left channels

correctly.

Diagram 1

Wire Nuts

To Speaker

Ampli er

To Remaining

Speakers

From