DCS DCS-C-24W Руководство по уходу и установке - Страница 4
Просмотреть онлайн или скачать pdf Руководство по уходу и установке для Варочная панель DCS DCS-C-24W. DCS DCS-C-24W 18 страниц. Wok cooktop
Также для DCS DCS-C-24W: Руководство по уходу и установке (17 страниц)
Печатать страницу
STEP 2: COOKTOP INSTALLATION
1. To ensure professional results, the cabinet and
countertop openings should be prepared by a
qualified cabinet worker.
2. The clearances shown in Fig.1 are required for
installations of cooktop and islands.
3. The cooktop is designed to hang from the coun-
tertop by its side flanges. The countertop how
ever, must be strong enough to support this
heavy cooktop. It may be necessary to add a 2
x 4 corner brace (See Figs.3, 4, and 5). Another
alternate would be to construct a deck to set the
cooktop on.
4. The cooktop can be installed in various positions
with the front either flush or projecting, depend-
ing on the countertop depth. (See Fig.2 side
view of cooktop; see Figs.3-5 for alternate
mounting positions.)
FIG. 1
CABINET PREPARATION
VENT HOOD
13"
Min.
30" Min.,
36" Max.
18" Min.
counter top level
0" Bottom Clearance
as defined in the "National Fuel Gas Code" (ANSI Z223.1, Latest Editon).
> The level of the cooktop top must be at the same level or above the
countertop level.
FIG. 6
FIG. 2
Countertop level
9"
3" To Center Line
of Gas Inlet
Cabinet face for installation with projecting control panel
Cabinet face for installation with flush control panel
3" min each side
12" Min. to
Combustible
Material
,
Each Side
0" Rear Clearance
(w/ backguard)
12" (w/out backguard)
0" Side Cutout Clearance
3
Counter-Sunk Screws
26-3/8"
12"
1/2"
22-5/8"
3/4"
23-3/8"
2"
CAUTION:
36" Min. to
combustible
material , from
cooking surface
777fig12
777fig07