DCS DCS-C-24W Руководство по уходу и установке - Страница 4
Просмотреть онлайн или скачать pdf Руководство по уходу и установке для Варочная панель DCS DCS-C-24W. DCS DCS-C-24W 17 страниц. Wok cooktop
Также для DCS DCS-C-24W: Руководство по уходу и установке (18 страниц)
Печатать страницу
CABINET PREPARATION
STEP 2: COOKTOP INSTALLATION
1. To ensure professional results, the cabinet and
countertop openings should be prepared by a
qualified cabinet worker.
2. The clearances shown in Fig.1 are required for
installations of cooktop and islands.
3. The cooktop is designed to hang from the coun-
tertop by its side flanges. The countertop how
ever, must be strong enough to support this
heavy cooktop. It may be necessary to add a 2
x 4 corner brace (See Figs.3, 4, and 5). Another
alternate would be to construct a deck to set the
cooktop on.
4. The cooktop can be installed in various positions
with the front either flush or projecting, depend-
ing on the countertop depth. (See Fig.2 side
view of cooktop; see Figs.3-5 for alternate
mounting positions.)
FIG. 1
18" Min.
VENT HOOD
3" min each side
13"
Min.
30" Min.,
36" Max.
counter top level
0" Bottom Clearance
as defined in the "National Fuel Gas Code" (ANSI Z223.1, Latest Editon).
> The level of the cooktop top must be at the same level or above the
countertop level.
FIG. 6
FIG. 2
12"
Countertop level
9"
1/2"
3" To Center Line
of Gas Inlet
3/4"
Cabinet face for installation with projecting control panel
Cabinet face for installation with flush control panel
12" Min. to
Combustible
Material
,
CAUTION:
Each Side
36" Min. to
combustible
0" Rear Clearance
material , from
(w/ backguard)
cooking surface
12" (w/out backguard)
0" Side Cutout Clearance
777fig12
3
Counter-Sunk Screws
26-3/8"
22-5/8"
23-3/8"
2"
777fig07