GALLERY 36 Руководство по эксплуатации - Страница 13
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Промышленное оборудование GALLERY 36. GALLERY 36 18 страниц. Canvas stretching machine
Печатать страницу11. The pressure gauge on the right side of your stretching machine indicates regulated
air pressure to the "stretching plates". It is a safe practice to always start a stretch at
around 15 – 20 psi this is accomplished with the Stretcher Bar Regulator (located right
of the toggle switch).
12. If you need more pressure you can always increase stretching pressure. Do not
"overstretch", a tight stretch can be obtained with only 20-30 psi.
13. When you are satisfied with the tension you can staple the canvas to the frame with a
long-nosed pneumatic staple gun, shown in the photo below. The staple gun is operated
upside down and the trigger is depressed with the thumb. Slide the nose of the staple gun
along the angle bar beneath the stretcher frame. Place a staple at least 1 every inch.
13. Release the stretch by flipping the toggle switch the opposite direction, depress the
foot pedal to open the clamp and remove the artwork. Rotate the artwork 90 degrees; use
the deck of your machine and the work surface to support the artwork. This is how you
stretch each end.
13