Dynaudio Sub 6 Руководство пользователя - Страница 16
Просмотреть онлайн или скачать pdf Руководство пользователя для Динамики Dynaudio Sub 6. Dynaudio Sub 6 20 страниц.
Печатать страницу
Sub 6 Configuration Menus 4
Sub 6 In Use
•
Auto standby: Select to specify
Once installed and configured, your
the delay time before the subwoofer
Sub 6 should require little attention other
will switch to Standby mode when
than perhaps occasional volume control
unused. The auto standby feature can
adjustment to suit different types of
also be switched off.
programme material.
•
Line Wake-up: Select to enable or
Grille Removal and replacement
disable trigger input switch on.
The Sub 6 can be used with its grilles
fitted or removed. To remove the grilles
•
Left main speaker distance:
simply pull them carefully away from the
Select to specify the distance in
cabinet. To refit a grille align its pegs with
metres of the left main speaker from
the fittings on the face of the cabinet and
the listening position.
gently push the grille home to secure it in
place. Always take care not to damage
•
Right main speaker distance:
the moving parts of the drive units when
Select to specify the distance in
removing or replacing grilles.
metres of the right main speaker from
the listening position.
•
Subwoofer distance: Select to
specify the distance in metres of the
subwoofer from the listening position.
Note
Distances are specified in the Sub 6
•
Status: Select to display the
configuration menus in order to
subwoofer operational status.
equalise the signal arrival times from
the subwoofer and main speakers at
•
Factory Reset: Select to return your
the listening position. This ensures
Sub 6 to its default settings. The
that the phase relationship between
rear panel Auto ON/OFF switch will
the subwoofer and main speakers
engage or defeat automatic switch on
is correct and that they integrate
and off in response to the presence or
optimally.
absence of an input signal.
30
Cleaning your subwoofer
Bush the grille surfaces with a soft brush
and the cabinet surfaces with a clean
lint-free cloth. Do not use a vacuum
cleaner. If you wish to use a cleaning
agent, apply it to the cleaning cloth
and not directly to the subwoofer. Test
a small area first, as some cleaning
products may damage some of the
surfaces.
Support
Should you require help or advice there
are a variety of support options for
Dynaudio products. These can be found
at dynaudio.com:
For a central listening position the
Left and Right speaker distances
should be equal.
If two subwoofers are used their
distance to the listening position
should be specified individually.
Sub 6 Troubleshooting
There are various reasons why a
subwoofer might not function properly
in a system without it being faulty. The
checklist on the next page will help solve
problems you may encounter. Before
consulting your Dynaudio dealer, check
this list first.
Check this first:
Check if all signal cables are
•
connected properly.
Check settings in bass management
•
menu of the connected processor/
receiver.
Carefully and gradually increase
•
the subwoofer volume level on the
processor/receiver.
Carefully and gradually increase the
•
subwoofer volume level using the
subwoofer VOLUME control.
Configuration and Use
31