Galletti DST 46 Техническое руководство по установке - Страница 3
Просмотреть онлайн или скачать pdf Техническое руководство по установке для Вентилятор Galletti DST 46. Galletti DST 46 8 страниц. Air destratifiers
Также для Galletti DST 46: Техническое руководство по установке (8 страниц)
Печатать страницу
DST
1
MAIN FEATURES
In working environments heated with hot air systems the need to keep the
temperature at approximately 18°C, causes the air to stratify at the top of the
room, with much of the heat remaining unused, which is destined to flow
toward the atmosphere.
The DST destratifier eliminates this problem by generating a vertical flow of
air to reduce the difference between the temperature at the floor and the
temperature at the ceiling to about 3°C.
In the hot season the DST destratifier may be used to obtain a good
ventilation.
2
UNIT DESCRIPTION
2
5
3
10
1
4
7
8
9
(1) Cabinet: side panel
(2) Cabinet: upper/lower panel
(3) Rear panel/fan compartment
(4) Regulation thermostat
(5) Safety grille (fan) supporting motor
(6) Adjustable louvers
(7) electrical box
(8) Overload cut-out
(9) Plastic corner trim on cabinet (left and right)
(10) Conveyor duct
(11) Wall/ceiling mounting brackets
11
6
All copying, even partial, of this manual is strictly forbidden
3
CONSTRUCTIVE FEATURES
-
Cabinet: made of prepainted sheet metal complete with ABS corner trim,
is complete with adjustable aluminium louvers (spring operated) placed
on the air outlet which allow an optimal distribution of the air.
-
Axial fan with statically balanced sickle blades housed in a specially
designed compartment that enhances ventilation and reduces noise
emission.
-
Safety grille made of electrogalvanised steel wire: it supports the motor
and is fixed to the cabinet by means of vibration damping supports.
-
Motor: standard equipped with:
- two speeds
- power supply 400V - 3 - 50Hz
- delta-star type
- 4 poles operation for model DST 16
- 6 poles operation for all the models from 26 to 66
- tropicalized
- internal thermal protection (klixon)
- IP 55 grade of protection
- Class F windings
-
Overload cut-out with manual reset for motor protection
-
Thermostat: connected to the overload cut-out to start and stop the DST
destratifier at the set temperature
-
Suspending brackets: made of stainless steel metal, for the suspending
the unit from the ceiling.
3
AP66000443 - 02