HighPoint SSD7103 Руководство по установке - Страница 10

Просмотреть онлайн или скачать pdf Руководство по установке для Контроллер HighPoint SSD7103. HighPoint SSD7103 12 страниц. Linux ubuntu desktop 19.10
Также для HighPoint SSD7103: Руководство по установке (11 страниц), Руководство по установке (11 страниц), Руководство по установке (15 страниц), Руководство по установке (12 страниц), Руководство по установке (12 страниц), Руководство по установке (13 страниц), Руководство по установке (11 страниц), Руководство по установке (11 страниц), Руководство по быстрой установке (9 страниц), Руководство по установке (12 страниц)

Печатать страницу
HighPoint SSD7103 Руководство по установке
SSD7103 Linux CentOS7.8 Installation Guide
k. Follow the prompts to complete the driver installation.
l.
After the installation is complete, you can perform system update operations.

3 Monitoring the Driver

Once the driver is running, you can monitor it through the Linux proc file system support.
There is a special file under /proc/scsi/hptnvme /. Through this file you can view driver
status and send control commands to the driver.
Note
The file name is the SCSI host number allocated by OS. If you have no other SCSI cards
installed, it will be 0. In the following sections, we will use x to represent this number.
Using the following command to show driver status:
# cat /proc/scsi/hptnvme /x
This command will show the driver version number, physical device list and logical device
list.

4 Installing RAID Management Software

HighPoint RAID Management Software is used to configure and keep track of your hard
disks and RAID arrays attached to
Please refer to HighPoint RAID Management Software documents for more information.

5 Trouble Shooting

If you do not install the system or update the kernel according to the installation manual,
the system will crash and you will not be able to enter. Please follow the steps below.
a.
Select the default kernel (3.10.0-1127.el7.x86_64)and enter the system.
controller.
SSD7103
- 8 -