adeptus 78101 Инструкция по сборке Руководство - Страница 10
Просмотреть онлайн или скачать pdf Инструкция по сборке Руководство для Выдвижной ящик для ЖК-дисплея adeptus 78101. adeptus 78101 12 страниц. Cottage single drawer end table / nightstand
Печатать страницу
10
INSTALL THE DRAWER
11
ADJUST DRAWER ALIGNMENT
D=02
3.5 x 14
mm
Screw
NOTICE:
• Tilt the back of the drawer upward to get
• Once clear of the wheels, you can level
H
H
D
CONTAINED
it past the wheels on the drawer runners.
the drawer and slide it in.
After completed assembly, it is
necessary to adjust the drawer
alignment to get the drawer
perfectly square.
To adjust the drawer front position:
• Loosen the screw (part H) you used to
install the drawer runner (either parts E
or F) in steps 5 or 6, to the side panel
(parts 02 or 03), depending on the side
(left or right), as shown.
• With the screw (part H) loosened, you
can make the necessary slight
adjustments (up or down) to the drawer
runner to achieve the proper drawer
alignment.
Once the drawer alignment is square, secure
the position of the drawer runners (parts E &
F) to the side panels (parts 02 & 03) by re-
tightening the part H screw and adding the
part D screw as shown.
Complete these steps for both the left and the
right side of the drawer.
10-11