DDK CM10-SP10S-S(D6) Руководство по сборке - Страница 10

Просмотреть онлайн или скачать pdf Руководство по сборке для Кабели и разъемы DDK CM10-SP10S-S(D6). DDK CM10-SP10S-S(D6) 12 страниц. Plug connector cable

Печатать страницу

3-8. Tightening a clamp nut

(1) Temporarily tighten the clamp nut on the angle back shell.

* To prevent the loosening, it is recommended to coat the straight back shell with adhesive.

Recommended adhesive: 1401B (Three Bond Co., Ltd.)

(2) Fix the 2 surface width of the angle back shell on the tightening guide.

(3) Set the tightening wrench adjusting the 2 surface width of the clamp nut.

(4) With the wrench, tighten the clamp nut on the angle back shell.

Recommended tightening torque: 4to5 N m

Note! When setting the work to the wrench, adjust the 2 surface width.

In case of squeezing the clamp nut with excessed torque provided as above, the clamp nut

may be broken. Please use the torque wrench.

To remove, take the reverse steps.

Fix the back shell

Tightening

wrench

Tighten

Recommended jigs and tools : Clamp nut tightening tool (wrench) (357J-51334T)

Tighten temporarily

Clamp nut

Set

Bit (357J-51345T)

Torque wrench (CL6N×8D, Tonichi Mfg.)

* Recommended tightening guide :(357J-50494T)

*Recommended adhesive

(to be coated on 2 threads of the

circumference)

Fix the back shell

Back shell

*Reference dimension for fixing the back shell

Torque wrench

Material No.

TC-605

(Back shell 2

sruface width)

Board

thickness: 10

* Recommendation:

Tightening guide

(357J-50494T)

Page

9/11