CopterX CX-CT6A Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Пульт дистанционного управления CopterX CX-CT6A. CopterX CX-CT6A 18 страниц. Computer transmitter, 6 channel, 2.4 ghz digital propotional radio control system

Печатать страницу

10. 2.4G Operation Notes

This is a 2.4G item with automatic address code. Digital transmission mode is used so

outside interference can be prevented.

10.01 Matching (code)

If you are going to match the receiver with other transmitter, please follow the

following steps:

1. Install the battery in the 2.4G transmitter and shut it down.

2. Insert the matching lines to the channel Bat port of the receiver. (Figure 1)

3. Connect the receiver battery to any one of the channel ports. If the two LEDs are

flashing at the same time, this means the receiver is successfully matched.

4. Press and hold the button on the transmitter, then switch on the power supply.

5. Check the LED on the receiver. If the LED does not flash, it means it is successfully

matched. (This process takes about 10 seconds.)

6. Release the match button on the transmitter. Take out the match line.

7. Install the servo and then do the test.

8. If the test is failed, repeat the above steps.

9. If the test is successful, insert the power supply port into BAT and make the match

completed. (The above steps are only suitable on CopterX 2.4G products.)

Match Line

Figure 1

CX-CT6A

Computer Transmitter