Galltec+mela DW Руководство - Страница 8

Просмотреть онлайн или скачать pdf Руководство для Аксессуары Galltec+mela DW. Galltec+mela DW 10 страниц. Sensors for humidity and temperature measurement with calibrated dmodul

Печатать страницу

Option: transmitter USB interface

Figure 1

General information:

The following settings can be made using the „Galltec-Mela USB Configuration Software" and a standard micro USB cable. The

transmitter is powered via USB. Except for adjustments, the transmitter requires no power via a power supply unit.

•

Change of physically measured values

•

Change of analogue output scaling / measuring range

•

Change of temperature variables to °C or °F

•

Air pressure input

•

Single point adjustment of temperature and relative humidity

Download:

Software

Galltec Configuration Manual:

Connecting Cable

(not part of the standard delivery)

Standard USB micro cable

- USB „A" plug to USB

„micro B"

Galltec+Mela

D Series_DW

page 8 of 10

www.galltec-mela.de/downloads

System requirements:

Operating system:

USB Port:

Software license agreement:

www.galltec-mela.de/downloads

Registration in Windows:

The transmitter is automatically registered in Windows via the USB cable after

connecting to the PC. No drivers are required. Only one Galltec Mela transmit-

ter can be configured and adjusted at a time.

Warning:

If the transmitter has current outputs (4-20mA) and an USB in-

terface ensure galvanic isolation between PC and power sup-

ply on the connection terminals of the sensor. (see separate

Galltec Configuration Manual „USB Configuration Manual" at

www.galltec-mela.de Downloads).

We recommend the use of an USB isolator. We successfully

tested: https://de.muc89.com/isar520 for that purpose. With

this USB isolator please leave the jumpers in the delivery

state for the USB full speed mode we use.

Win 10 / Win 8 / Win 7 / Win Vista / Win XP

USB 2.0