Dynex DX-CR312 Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Устройство для чтения карт Dynex DX-CR312. Dynex DX-CR312 13 страниц. Lecteur de carte mémoire 20-en-1
Также для Dynex DX-CR312: Руководство (6 страниц), Часто задаваемые вопросы (5 страниц), Руководство по быстрой настройке (2 страниц), Руководство пользователя (на английском языке) (13 страниц), (Французский) Manual De L'utilisateur (13 страниц)

20-in-1 Memory Card Reader

4 Type a name into the Volume Label box. The name of your memory card appears

next to the drive.

5 Click Start, then click OK in the Warning dialog box.

6 Click OK on the Format Complete window.

7 Click Close to finish.

Formatting a memory card (Macintosh)

Caution: Formatting a memory card permanently deletes all files on the card. Be sure that

If your computer has trouble recognizing a new memory card, format the memory card in

your device or by using the computer.

To format a memory card:

1 Click Go, then click Utilities.

2 Double-click the Disc Utility from the list.

3 In the left-hand column, select the memory card you want to format, then click the

Erase tab.

4 Specify a volume format and name for the memory card, then click Erase. A warning

box opens.

5 Click Erase again. The Erase process takes a minute or so to erase and reformat your

memory card.

Troubleshooting

If memory cards do not appear in My Computer/Computer (Windows operating systems) or

on the desktop (Mac operating systems), check the following:

• Make sure that the memory card is fully inserted into the slot.

• Make sure the card reader is fully connected to your computer. Unplug and reconnect

your card reader.

• Try a different memory card of the same type in the same slot. If a different memory

card works, the original memory card should be replaced.

• Disconnect the cable from your card reader and shine a flashlight into the empty card

slots. Look to see if any pin inside is bent, then straighten bent pins with the tip of a

mechanical pencil. Replace your memory card reader if a pin has bent so much that it

touches another pin.

If memory cards appear in My Computer/Computer (Windows operating systems) or on the

desktop (Mac operating systems) but errors occur when writing or reading, check the

following:

• Make sure that the memory card is fully inserted into the slot.

• Try a different memory card of the same type in the same slot. If the different memory

card works, the original memory card should be replaced.

you copy any valued files to a computer before formatting a memory card. Do not

disconnect the card reader or remove the memory card while formatting is in progress.