Galvin Engineering Ezy-Drink 85326X Установка изделия Manualline - Страница 2
Просмотреть онлайн или скачать pdf Установка изделия Manualline для Сантехническая продукция Galvin Engineering Ezy-Drink 85326X. Galvin Engineering Ezy-Drink 85326X 4 страницы. Lead free remote bottle filler
Печатать страницуINSTALLATION
IMPORTANT: Galvin Engineering products must be installed in accordance with these installation instructions
and in accordance with AS/NZS 3500, the PCA and your local regulatory requirements. Water and/or electrical
supply conditions must also comply to the applicable national and/or state standards. Failing to comply with
these provisions shall void the product warranty and may affect the performance of the product.
1. Fit Stem
−
Drill hole in bench/trough as shown in
rough-in dimensions.
−
Fit O-Ring to the groove underneath the
stem.
−
Fit stem through the drilled hole
ensuring the O-Ring has seated
properly.
3. Fit thumb screws
−
Fit thumb screws into the threaded holes on the locking nut and tighten until the stem is securely
mounted on the bench/trough.
2. Fit Locking Nut
−
Fit and Tighten locking nut until it stops (roughly 8mm
below the bench/trough).
Version 3, 31 May 2019, Page 2 of 4