Dynex DX-TVM113 Руководство по сборке - Страница 5

Просмотреть онлайн или скачать pdf Руководство по сборке для Крепление для телевизора Dynex DX-TVM113. Dynex DX-TVM113 13 страниц. Slim-profile tv wall mount
Также для Dynex DX-TVM113: Руководство по быстрой настройке (2 страниц)

Печатать страницу

Installation instructions

STEP 2 - Option 1: Installing on a wood stud* wall

Note: Any drywall covering the wall must not exceed 5/8" (16 mm).

1 Locate the stud. Verify the center of the stud with an edge-to-edge stud finder.

2 Align the wall plate template (R) at the height you determined in the previous step, make sure that it is level,

then tape it into place. Use a pencil to mark the lag bolt hole locations (4) on the stud centers. Remove the

wall plate template.

3 Drill pilot holes to a depth of 2.5 in. (63.5 mm) using a 7/32 in. (5.5 mm) diameter drill bit.

4 Align the wall plate (A) with the pilot holes, insert the lag bolts (P) through the lag bolt washers (O), then

through the holes in the wall plate. Tighten the lag bolts only until they are firm against the wall plate.

CAUTION:

• Avoid potential injuries or property damage!

• DO NOT over-tighten the lag bolts (P).

* Minimum wood stud size: common 2 x 4 in. (51 x 102 mm)

nominal 11/2 x 31/2 in. (38 x 89 mm).

* Minimum horizontal spacing between fasteners cannot be

less than 16" (406 mm).

You'll need

P (4)

O (4)

Top

Haut

Parte superior

Tools Needed

Outils nécessaires

Herramientas requeridas

http://san.us/286

Wall plate template (R)

Wall plate (A)

Level

16-24 in.

DX-TVM113 Wall Plate Template • Gabarit • Plantilla

Top

Haut

Parte superior

Note: For wood frame installations, use a stud finder to locate wood

studs first.

Remarque : Pour une construction à ossature de bois, localiser

d'abord les montants en bois, à l'aide d'un détecteur de montants.

Nota: para la instalación en construcciones de armazón de madera,

primero debe localizar las vigas de madera con un localizador de vigas.

Need more information about your mount? Scan this QR code or visit www.dynexproducts.com.

<FR>Need more information about your mount? Scan this QR code or visit www.dynexproducts.com.

<SP>Need more information about your mount? Scan this QR code or visit www.dynexproducts.com.

V1 13-0140

Edge-to edge

stud finder

Tape

Pencil

DX-TVM113

2.5 in.

(63.5 mm)

1/2" socket wrench

Drill

7/32" wood

drill bit