Coralife Turbo-Twist 3x Руководство - Страница 2
Просмотреть онлайн или скачать pdf Руководство для Лабораторное оборудование Coralife Turbo-Twist 3x. Coralife Turbo-Twist 3x 5 страниц. Uv sterilizer
Также для Coralife Turbo-Twist 3x: Руководство по эксплуатации (6 страниц), Руководство по эксплуатации (12 страниц)
Печатать страницу
Bracket Installation
Adjust the tank bracket so that it
hangs on the outside of the aquarium.
RANGE OF THE CLAMP
PULL-OUT
PULL-OUT
PLACE ON
AQUARIUM
Once step 2 is finished, snap the main
body into the bracket indicated by a
"click". Snap the other bracket with the
suction cup in the same way.
SNAP-IN
For horizontal positioning,
take the suction cup out
and snap the main body
into the brackets until it
locks with a "click".
UV Lamp installation
Remove threaded-cap, install UV lamp
into socket until lamp "clicks" into place.
Slide the Turbo-Twist bracket onto the tank
bracket. Make sure the Turbo-Twist bracket
is securely fastened onto the tank bracket.
TURBO-TWIST
BRACKET
TANK
BRACKET
SNAP-IN
SUCTION CUP
SNAP-IN
SNAP-IN
THREADED-CAP
UVC LAMP
Make sure that the flat O-ring gasket is properly positioned
inside the threaded-cap (already installed in unit). Screw
the threaded-cap tightly back into place.
O-RING GASKET
Attaching the hose lock nuts
Position the hose lock nuts
on the hose-barb inlet/outlet.
HOSE LOCK NUT
Hose barb adapter installation
Place the O-ring on
Hand tighten the hose
hose barb inlet/outlet.
barb adapter onto the
Turbo-Twist.
O-RING
HOSE BARB ADAPTER
Note: Water will leak if the O-ring is not in place.
Installing
the Turbo-Twist
Hang the unit using
the Turbo-Twist
bracket and suction
cup on the outside
of the aquarium.
Adjust the tank
bracket to secure
the Turbo-Twist
UV Sterilizer.
AQUARIUM
Note: The plug and cord
should be turned together
when screwing the threaded-
cap back into place.
Use flexible tubing to connect the sterilizer
to the water supply. Turn the hose lock nut
counter-clockwise to tighten flexible tubing
onto the hose barb. Hose lock nuts require
only hand tightening.
Note: Do not
use O-ring when
larger hose barbs
are being used.
Use flexible tubing to connect
the sterilizer to the water supply.
Turn the hose lock nut counter-
clockwise to tighten flexible
O-RING
tubing onto the hose barb.
FLEXIBLE
TUBING
SMALL HOSE LOCK NUT
Horizontal Positioning
Attach Turbo-Twist bracket with screws on
a fixed surface.