Dynisco 1490 Руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сенсорная панель Dynisco 1490. Dynisco 1490 20 страниц. Din indicator
Также для Dynisco 1490: Руководство по эксплуатации (2 страниц)
Печатать страницу
From lab to production,
providing a window into the process
CAUTION:
Installation should be only performed by technically competent personnel.
Local Regulations regarding electrical installation & safety must be observed. The host
equipment is required to provide a suitable electrical, mechanical and fire enclosure to
meet relevant safety standards. Impairment of protection will occur if the product is
used in a manner not specified by the manufacturer.
1. Installation
Installing Option Modules/Maintenance
CPU PCB
Future Option
Option Module 2
Option Module 1
CAUTION:
All power supply connections to the device must be removed
when carrying out any form of maintenance.
To access modules, first detach the PSU and CPU boards from the front by lifting first
the upper, and then lower mounting struts. Gently separate the boards.
a. Plug the required option modules into the correct connectors, as shown below.
b. Locate the module tongues in the corresponding slot on the opposite board.
c. Hold the main boards together while relocating back on the mounting struts.
d. Replace the instrument by aligning the CPU and PSU boards with their guides in the housing, then
slowly push the instrument back into position.
NOTE: Option modules are automatically detected at power up.
P/N: n/a
Rev: n/a
www.dynisco.com
-2-
Mounting Sturts
Option Module A
Option Module 3
PSU PCB
ECO: n/a