AGS Merlin GDP2X Руководство по установке и эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Детекторы газа AGS Merlin GDP2X. AGS Merlin GDP2X 16 страниц. Gas detection panel

Печатать страницу

Installation & Operation Manual

DETECTOR CHAIN TERMINATION

DETECTOR Chain Termination Resistor Switch

Signal communication issues may occur where the bus length is too long or high baud rates

are used. In this instance – terminating at each end of the chain may help the quality of the

data signal. To do this - turn on the [CHAIN TERMINATION RESISTOR] switches shown below.

Example 1.

Example 2.

FIRE PANEL

The terminal for fire alarms is detailed on the circuit board as [FIRE PANEL].

HEAT SENSOR

The terminal for heat sensors/ thermal

links is detailed as [HEAT SENSOR].

EM STOP

Connections for remote emergency

shut-off or stop buttons is detailed on

the circuit board as [EM STOP].

These terminals are volt free and fitted

with links to represent a closed circuit.

AGSGDP2X - IOM Iss: 3 03-20

Merlin GDP2X