Coram Showers OPTIMA Series Руководство - Страница 9

Просмотреть онлайн или скачать pdf Руководство для Душевые кабины Coram Showers OPTIMA Series. Coram Showers OPTIMA Series 16 страниц.

Печатать страницу
Check contents of packs before installation. If anything is
missing, contact our Customer Careline: 01746 713410
SLIDING DOOR CONTENTS
PN3230
PN3225
32mm
PN60014
2
13mm
PN3222
10
10mm
PN4748
14
PN50103
4
PN4745
4
PN60418
1
1
a
=
100mm
max
a: Drill holes in both wall channels at points shown using a 4.5mm drill bit, where shown.
b: Ensure the shower tray is level in all directions. IMPORTANT: Clean the tray and seal the gap between the tray surface and tiles.
It is important that the tray is sealed right up to the tray edge so that the bottom of the wall channel is sealed. Failure to do this will
cause water to leak under the wall channel and between the tray and tiles, resulting in damp patches on the wall and under the tray.
2
PN80519
8
1000 = PN40261
1200 = PN40262
8
1400 = PN40263
PN40260
PN40258
PN40259
PN40010
PN50382
PN60058
=
=
ø 4.5
mm
PN10801
1
2
1
1
1
1
2
1
b
100mm
max
The enclosure can be assembled with the side panel
on either the right or left and the door on either the
right or left (see step 4).
Note: The following instructions show the enclosure
with the side panel on the left and the door on the
right hand side.
1000 RAIL - PN80528
1200 RAIL - PN80529
1400 RAIL - PN80530
SIDE PANEL CONTENTS
PN3222
3
10mm
PN10801
1000 RAIL - PN80528
1200 RAIL - PN80529
1400 RAIL - PN80530
PN4748
3
9