Coram Showers PREMIER Инструкции по установке - Страница 3

Просмотреть онлайн или скачать pdf Инструкции по установке для Душевые кабины Coram Showers PREMIER. Coram Showers PREMIER 4 страницы. Double sliding door / side panel
Также для Coram Showers PREMIER: Руководство (16 страниц)

Печатать страницу
3
a
a: Insert your door into the wall channel (see Door instruction).
b: Fit the corner post onto the side panel (ensuring that the H2O label is on the outside of the enclosure). IMPORTANT: The corner post MUST
be fitted as shown above. c: Insert the side panel into the wall channel and the corner post onto the door.
4
a
a: Check that the enclosure is vertical (see Door instruction). IMPORTANT: Ensure the door and side panel are parallel with the edge of the tray.
b: Drill the inside of the wall channels and corner post using 3mm drill bit ONLY where shown. DO NOT drill too deep. Fix using 8 x 10mm screws.
c: Check that the enclosure is still vertical. Drill the inside of the wall channel and corner post using 3mm drill bit where shown. DO NOT drill too
deep. Fix using 4 x 10mm screws.
a
5
a: Insert 3 wall channel clips (PN50359) down the slot in each wall channel and space out equally down the length of the channels.
b: Push fit the wall channel cover strips (PN11031) onto the wall channels as shown.
b
H2O label
on outside
of side
panel.
b
PN50359
Wall
channels
b
PN11031
c
Corner
post
ø 3
mm
10mm
c
PN11031
3