mailcoms 1E42 Руководство по установке - Страница 4

Просмотреть онлайн или скачать pdf Руководство по установке для Принтер mailcoms 1E42. mailcoms 1E42 8 страниц.

Connecting the Printer via

Network

Connect your Network cable to your printer and Network socket.

Ensure you have the correct power cord for your region.

Connect the power cord and adapter (as shown) to your printer and switch on.

Network Cable

Printer Ready

Wait for approximately 45 seconds until the green light remains constant and

the printer is ready.

Aligning the Label Roll

Press the

Note- If the label does not feed correctly please refer to label alignment

instructions inside the printer top cover.

Tear off the correctly dispensed label.

Printing a System Report

Print the System Report to obtain the IP address assigned to the label printer.

1. To print the System Report Simultaneously press the button on the front of the

label printer and the recessed button on the back of the printer with a suitable

object such as a pencil or similar.

2. Keep the printed report that will be needed later in the installation process.

button and check that the label feeds out correctly.

Power Cable