CORBERO FD 3290 I Буклет с инструкциями - Страница 6

Просмотреть онлайн или скачать pdf Буклет с инструкциями для Холодильник CORBERO FD 3290 I. CORBERO FD 3290 I 11 страниц.

Position the runners (H) at the top and bottom of the

inside of the kitchen unit as shown in Fig. 8 and mark

the position of the external holes.

After preparing the holes, screw the runners to the

kitchen unit door using 3.5x16 mm screws.

D094

Open both the appliance door and that of the kitchen

unit to approx. 90 .

Place the little plates over the runners. Hold the doors

of the appliance and the unit together and mark the

holes.

8mm

D415

Remove the little plates and make the holes with a di-

am. of 2 mm. Replace the little plates over the runners

and screw in the screws provided (3.5x16 mm).

For the alignment of the kitchen unit door, if neces-

sary, use the clearance size of the slotted holes.

At the end of the procedure, check that the doors of

Fig. 8

the appliance and the kitchen unit open properly.

D416

The upper compartment can be opened by means of

the sliding system illustrated in the previous point, or

else by attaching on the door the handle which is sup-

plied as an accessory (see ﬁgure).

Fig. 9

D029

Fig. 10

Fig. 10a