Hikmicro HM-G605-LENS Руководство пользователя - Страница 4
Просмотреть онлайн или скачать pdf Руководство пользователя для Объектив камеры Hikmicro HM-G605-LENS. Hikmicro HM-G605-LENS 12 страниц. Interchangeable lens
Печатать страницу
Product appearance is for reference only and may
differ from the actual product.
1 Device Overview
The interchangeable lens series is often used with
handheld thermal cameras to expand the focal length of
the original camera to different ranges, so as to obtain
different FOVs and scene scopes.
The interchangeable lens series has three types. (See 1.1 )
There should be one interchangeable lens and one target
plate set (see 1.2 ) in the package.
2 Installation
Follow the diagram to remove the decorative ring on the
camera and install the interchangeable lens.
Note:
The handheld camera shown in the diagram is only for
demonstration.
3 Lens Calibration
3.1 Set up the calibration environment
1. Place the target plate on a flat surface with the
"TARGET" facing the lens.
2. Power on the target plate to heat it (12 VDC).
3. Start the calibration when the temperature of the
plate rises (about 1 minute later after powering on
the plate).
3.2 Calibrate the lens
1. Start the handheld camera.
2. Follow the prompt to input Interchangeable Lens
SN and Interchangeable Lens Param.
Interchangeable
Lens SN
Interchangeable
Lens Param
Note:
● On some camera, the interchangeable lens
may be referred to as "Teleconverter".
● If no prompt pops up after starting the camera,
check if the lens is firmly mounted.
● If you accidently leave the calibration program,
go to
Interchangeable Lens Calibration
again.
3. Select Interchangeable Lens Calibration, and follow
the prompts to continue.
1). Hold the camera and aim it at the target plate
(as shown in
camera and target plate should meet the
following requirement.
2). Press OK.
The camera emits a beam of red laser.
3). Slightly adjust the camera position to aim the
red laser dot at the "TARGET" character on the
plate and keep still for measuring the distance.
③
Note:
● If the measurement succeeds, the distance is
displayed on the screen. If it fails, adjust the
distance and try again.
● It is recommended to use a tripod to fix the
camera if keeping it still is difficult.
4). Use the left/right buttons or the focus ring to
adjust the focus, and press OK after the
"TARGET" is clear (as shown in
Printed near the aiming point of
the lens
Printed on the lens label
Local Settings > Capture Settings >
). The distance between the
②
Lens Model
HM-G605-LENS
HM-G620-LENS
HM-G630-LENS
①
Distance
0.5 m - 1.5 m
1.5 m - 2.5 m
3.0 m – 4.0 m
④).
4
English
to enter