Frigidaire LGID2475QF1A Руководство по эксплуатации и уходу - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и уходу для Посудомоечная машина Frigidaire LGID2475QF1A. Frigidaire LGID2475QF1A 20 страниц.

Печатать страницу

Status Window

The STATUS window, available on some models,

indicates the following activity:

1-24.............

CL....................

MINUTES..........

L0----L6............

E r r o r C o d e s

Displayed

Error Code*

i10

i20;

i40;

iF0

i30

i50

i60

iC0

*In all Error Code instances, if Pressing the cancel button or turning power off at the breaker for

5 min. does not resolve the problem, contact the Frigidaire Customer Care Center at 1-800-944-

9044.

Number of delay start

hours. The last hour

will count down in

minutes.

Close dishwasher

door. The status

indicator lights will

also ﬂ ash to indicate

current cycle status.

Number of minutes

left in cycle (1-199).

Level of Rinse Aid

dosage.

Problem

A low ﬁ ll has been

detected.

Clogged ﬁ lters or a

restricted drain line

has been detected.

A leak or overﬂ ow

of water has been

detected in the

bottom pan.

A problem has been

detected with the

drain or wash motor.

A problem has been

detected with the

water heating system.

A problem has been

detected with the

electronic control

system.

OPERATING INSTRUCTIONS

Status Indicator Lights

The CLEAN light will remain on until the door is

opened.

When the SANITIZE option is selected and the

criteria is met, the Sanitized indicator will display

and remain on until the door is opened. If the

sanitization criteria is not achieved, the indicator

will not display. This can happen if the cycle is

interrupted or if the sanitization temperature

could not be reached due to incoming water

temperature signiﬁ cantly below 120

Green Light

When the GREEN LIGHT illuminates on the ﬂ oor

this indicates that the wash cycle is complete.

Solution

Look for a pinched water supply line, or water shutoff is

not completely opened.

Check and clean both ﬁ lters and sump area and check

for a pinched or blocked drain hose. If the drain line is

attached to a disposer, check that the knockout plug has

been removed.

Look for loose connections at the water inlet valve and

ensure the unit is properly leveled.

Pressing the cancel button or turning power off at the

breaker for 5 min. should clear this error code and the

unit can be restarted.

If this does not resolve the problem, service

will need to be called.