Gama Sonic ORION SOLAR LAMP POST Руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Наружное освещение Gama Sonic ORION SOLAR LAMP POST. Gama Sonic ORION SOLAR LAMP POST 4 страницы.
Печатать страницу
Assembly Instructions
1. Using the base pole (G) as a
template, mark and drill three holes
into the concrete where you want
to mount your lamp.
2. Using the concrete anchors, secure
the base pole (G) to the surface.
3. Attach the middle pole (F) to the base
pole (G) using the three provided screws.
4. Attach the top pole (E) to the middle pole
(F) by twisting it clockwise.
5. Attach the spacer pole (D) to the top pole
(E) by twisting clockwise.
6. Attach the centerpiece
(B or C) to the spacer
pole (D) by twisting
clockwise.
7. Attach the lamp head (A) to
the arm of the centerpiece
(B or C) by twisting
clockwise.
8. Install the GS Solar LED
Bulb and switch the
lamp to the Eco or High
setting.
9. Install the lens (H) onto
the lamp head (A) by
twisting clockwise.
Note: Make sure the lens is
fastened securely.
10. Repeat steps 7-9 two
more times if installing
the triple head lamp
(Item 123BM50003).
page 3
Operation Instructions
1.
Install the GS Solar LED Bulb into the Top (A).
2.
Locate the operation switch on the underside of the Top (A).
3.
Switch the lamp to either the Eco or High setting according to your
preference:
Eco = Softer light output and longer duration
High = Brighter light output
4.
The lamp will operate automatically at dusk.
Replacement Parts
Replacement Batteries and Bulbs are available at
www.gamasonic.com or via our Toll Free number: +1-800-835-4113
Your Lamp can use the following bulbs:
A50WW10W – included bulb with Warm White LEDs (2700K)
A50BW10W – bulb with Bright White LEDs (6000K)
F30WW05W – Flame bulb with simulated flame LEDs
T45WW10W – Edison LED Bulb with Warm White LEDs (2700k)
Your Lamp uses two of the following battery:
GS32V15
ECO
HIGH