Gama Sonic GS-98S Руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Светильник Gama Sonic GS-98S. Gama Sonic GS-98S 6 страниц. Royal solar lamp post

Installation Instructions for models GS-98L\S\D\T

1. Mark and drill three holes, using the triangle marker (included), into a

solid surface no smaller than the fastening screws. The holes shall be

lined up with the holes of the lamp base (D).

2. Put the fastening screws (included) into the drilled holes with their

threaded ends facing up (Fig. 3).

3. Place lamp base onto fastening screws and secure base with the nuts

using a wrench (Fig 4).

4. Make sure the lamp base (D) is stable before installing Part (E).

5. Place part (E) on top of part (D) and tighten with the provided screws

using a wrench.

6. GS-98L:

6.1 Screw part (F) onto part (E).

6.2 Place Part (A) on top of Part (F) and tighten the 3 screws.

7 GS-98S:

7.1 Screw part (G) onto part (E) and part (F) onto part (G).

7.2 Place Part (A) on top of Part (F) and tighten the 3 screws.

8. GS-98D\GS-98T:

8.1 Screw part (G) onto part (E).

8.2 Screw Part (H) onto Part (G).

8.3 Place bracket (I) into part (H) and tighten the knob from within

Part (H), then screw the second screw from outside Part (I) to

secure the bracket to part (H).

8.4 Repeat steps (8.3) two times in model GS-98D and three times

in model GS-98T.

8.5 Install part (J) on top of Part (H) by screwing the two screws.

Fig. 3

Fig. 4

GS-98S/D/T

GS-98L