aireRyder F0042 Руководство - Страница 6

Просмотреть онлайн или скачать pdf Руководство для Вентилятор aireRyder F0042. aireRyder F0042 9 страниц.

Печатать страницу

White

Ground

Wire

White

Downrod

Fig.8

Safety Cable Hook

Safety Cable

Fig.10

Hanger Bracket

Canopy Screw

Canopy

Key Hole

Canopy Screw

Slot

Decorative Cap

Washer

Motor Screw

Remove the motor screws and washers from the

motor assembly.

Secure Blade Brackets to the motor with washers

and motor screws.

Make wire connections:

1). The white motor wire to the white wire from the outlet box with a wire nut.

Black

2). The black motor wire and blue wire to the black (hot) wire from the outlet box

with a wire nut.

3). The ground wires from the downrod and the hanger bracket to the ground wire

from the outlet box with a wire nut.

*** After making the wire connections, the wires should be spread apart with the

grounded wires on one side of the outlet box and the ungrounded wires on the

Blue

other side of the outlet box.

Black

*** After the connections have been made, the wires should be turned upward and

pushed carefully up into the outlet box.

Zip-tie

Fig.9

Remove one canopy screw (for

later use), then push the canopy

upwards by inserting canopy

screw head left in hanger bracket

into key hole slot, rotate the

canopy till the hole in canopy aligns

the hole in hanger bracket, finally,

secure the canopy to hanger

bracket with previous canopy

screw and tighten the other canopy

screw.

Attach the decorative cap to

canopy,rotate it clockwise until

tight.

Fig.12

Blade Bracket

Hang the safety cable into the safety cable hook,

tighten the safety cable to the safety cable hook

by using the zip-tie.

Tighten fan blades to blade brackets by using

washers and blade screws.

Switch Box

Cover

Key Hole Slot

Round Hole

Fig.13

Remove one fix screw (for later use), and loosen the other two

fix screws. Thread the wire through the switch box cover, and

then push the switch box cover upwards by inserting the other

two fix screw heads into key hole slots, rotate the switch box

cover till the round hole in switch box cover aligns the hole in

motor assembly, finally, secure the switch box cover to motor

assembly with previous fix screw and tighten the other two fix

screws.

PAGE: 6 / 9

Fig.11

Blade Screw

Washer

Fan Blade

Blade Bracket

Motor

Assembly

Fix Screw

160310