Cordex UT5000 Руководство пользователя - Страница 10
Просмотреть онлайн или скачать pdf Руководство пользователя для Испытательное оборудование Cordex UT5000. Cordex UT5000 13 страниц. Intrinsically safe ultrasonic thickness gauge
Также для Cordex UT5000: Краткое руководство по эксплуатации (3 страниц), Руководство пользователя (12 страниц), Инструкции по безопасной эксплуатации (7 страниц), Инструкции по безопасной эксплуатации (8 страниц)
Печатать страницу
GAUGE SETUP
To display the Gauge Setup menu, press
SETUP. Then, use the arrow keys to highlight
Gauge Setup and press the SEL key.
Choose from the following options:
•
Date Format
•
Sleep Timer
•
Units
•
Handedness
Use the arrow keys to highlight the required
option, then press the SEL key.
Date Format
Choose from the following formats:
•
YYYY/MM/DD
•
MM/DD/YYYY
•
MM/DD/YYYY
The time and date are updated automatically
whenever you connect to the UT5000 mini
app, CorDEX CONNECT or to CorDEX CAMS.
Time and Date cannot be set manually.
RUGGED
AUTHORITY
Sleep Timer
To save power, the UT5000 will switch off
after the specified period of inactivity. Choose
the time period: 1min, 2min, 3min, 4min or
5min.
Units
Choose whether the UT5000 uses and
displays metric or imperial units.
Handedness
Choose whether the main functions of the
UT5000 use the buttons on the left or right
side. The "handedness" setting refers to the
hand used by the operator to hold the device.
For example, if the operator holds the device
in their right hand, a 'right' handedness
setting ensures that the main functions of the
UT5000 are operated by buttons on the left
side of the unit.
You can also set the Date Format and Sleep
Timer using the UT5000 mini app.
VIEWING DATA
To view stored data, press the VIEW key on
the main display. Select STORED DATA, then
press the SEL key.
Choose from the following options:
•
Stored Measurements
•
Reset Basic Gauge Setup
Stored Measurements
Data is listed for each registered RFID Tag in
the following format:
•
RFID Tag
•
Tag Alias
•
Material, source and name, e.g. From List:
Alumin
•
Vel: Material velocity
•
Min: Minimum measurement
•
Max: Maximum measurement
•
Mea: Average measured value
•
Date: date of last measurement
•
Time: time of last measurement
Use the up and down arrow keys to scroll
through saved measurements.
UT5000 – Intrinsically Safe Ultrasonic Thickness Gauge
Reset Basic Gauge Setup
Select this option to restore the factory default
gauge settings, for example, Pulse Frequency.
Tag and material information is not affected.
!
Never open the battery or USB
compartments in a hazardous
environment.
19