Mainstays MSS136144273001 Инструкция по сборке Руководство - Страница 12
Просмотреть онлайн или скачать pdf Инструкция по сборке Руководство для Открытый камин Mainstays MSS136144273001. Mainstays MSS136144273001 16 страниц. 30 inch square gas-burning fire pit
Печатать страницу
Operating (continued)
LEAK TESTING OPERATION
WARNING: A leak test must be performed annually or if a part of the gas system is replaced.
WARNING: Never use an open flame to check for gas leaks. Be certain no sparks or open flames are in the area
while you check for leaks. Sparks or open flames will result in a fire or explosion, damage to property, serious
bodily injury, or death.
LEAK TESTING:
1, Make 2-3 oz. of leak detection solution by mixing one part liquid dishwashing soap with three parts water.
2, Make sure all fire pit and light valves are OFF
3, Apply several drops of solution where hose attaches to regulator.
4, Apply several drops of solution where regulator connects to cylinder.
5, Turn cylinder valve ON.
If bubbles appear at any connection, there is a leak.
1, Turn cylinder valve OFF.
2, If leak is at hose/regulator connection: tighten connection and perform another leak test. If bubbles continue appearing,
pls contact 855-600-9294 for assistance.
3, If leak is at regulator/cylinder valve connection: disconnect, reconnect, and perform another leak test. If you continue
to see bubbles after several attempts, cylinder valve is defective, and contact 855-600-9294 for assistance.
If NO bubbles appear at any connection, the connections are secure.
NOTE: Whenever gas connections are loosened or removed, you must perform a complete leak test .
Hose/Regulator
Connection
Regulator/Cylinder
Connection
12