AGT INDUSTRIAL AGT-ST4040C Руководство по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Промышленное оборудование AGT INDUSTRIAL AGT-ST4040C. AGT INDUSTRIAL AGT-ST4040C 10 страниц. 40ft x 40ft container roof shelter

Печатать страницу

- (20) Pipe clamps (#11)

- (20) Hex bolt (#11A)

- (38) Tie down straps (#13)

- (4) Tension tube end water plug (#17)

- (10) Plastic hose (#18)

- (8) Connector (#19)

After the Installation

Walk around and inspect the shelter periodically to make sure all components

are still firmly secured and the whole shelter is well supported. Check all bolts

and nuts as well as all connection points to make sure they are all in good

position. Check the base plates, adjust the ropes and tie downs if required and

clean the cover regularly.

Snow accumulating on the fabric cover must be removed as soon as possible.

If snow becomes solid ice on the cover, it will increase the weight on the roof

and may collapse the shelter or reduce the life span.

Keep the shelter on a dry ground most of the time. Do not keep the fabric dirt

skirt under water all the time, otherwise the fabric will deteriorate.

We strongly recommend you remove any snow from the roof immediately.

Do not leave any snow load on the roof overnight. Keep 3 feet of clearance on

all sides at all times. Do not allow snow to accumulate and pile up on the

sides of the building. Otherwise the pressure from the sides will push inwards

and could lead to a collapse.

Figure 7