GAME SolarPRo Xd1 4512 Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Нагреватель для плавательного бассейна GAME SolarPRo Xd1 4512. GAME SolarPRo Xd1 4512 12 страниц. Pool heater
Печатать страницу
4.
INSTALLATION INSTRUCTIONS
Heater – Filter – Pool Layout
The system layouts below will help you install the solar heater(s) to your above ground pool
BEFORE INSTALLING SOLAR HEATER
AFTER INSTALLING SOLAR HEATER
Heater - Pool Connections
These instructions assume that the pool and filter system are already assembled
and there is a hose attached to the pool return (pool water inlet)
Place the solar heater in a location where it will receive the greatest amount
of sunlight and at least 10 feet away from pool
NOTE: Hose connectors may come preinstalled.
1) Heater - Filter Pump Connection
a) Turn off filter pump
b) Block water flow at both the pool return inlet and the filter pump outlet
to prevent water from flowing through the hoses
c) Detach the pool return hose from your filter system and set aside
NOTE: If you are using an INTEX® filter, remove the
hose adapter from the filter port as well.
d) Locate the side hose connector and insert it into the side hose connection
opening – it is keyed to fit one way only – and turn counterclockwise to lock
into place It will turn about a ¼ turn to fully lock in place
e) Locate long filter hose and attach between pump (the port where the pool return
hose was previously connected ) and the side hose connector using
the included hose clamps
NOTE: depending on the size of your hose, the 1¼"-1½" reducer may need
to be used. Insert the reducer inside of the long filter hose and attach using
hose clamp. Apply a small amount of silicon based lubricant to the outside
of the side connector to allow an easy fit (see figure 1).
SAVE THESE INSTRUCTIONS
6
Meijer.com
NOTE: Not shown to scale
Reducer
(if needed)
Side Hose
Connection
Hose from
Filter/Pump
Hose Clamp
Figure 1