Dean SR14E Руководство по установке и эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Фритюрница Dean SR14E. Dean SR14E 12 страниц.

1.1

Safety Information

Before attempting to operate your unit, read the instructions in this manual thoroughly. Throughout this manual you will

find notations enclosed in double-bordered boxes with the symbol

actions or conditions that may cause or result in injury to personnel or damage to your system, and/or cause your system

to malfunction.

1.2

General Installation Instructions

This appliance is only for professional use and shall be used by qualified personnel only.

If this equipment is wired directly into the electrical power supply, a means for disconnection from the

supply having a contact separation of at least 3-mm in all poles must be incorporated in the fixed

This equipment must be positioned so that the plug is accessible unless other means for

disconnection from the power supply (e.g., a circuit breaker) is provided.

If this appliance is permanently connected to fixed wiring, it must be connected by means of copper

wires having a temperature rating of not less than 194°F (90°C).

If the electrical power supply cord is damaged, it must be replaced by a Frymaster Dean Factory

Authorized Servicer or a similarly qualified person in order to avoid a hazard.

This appliance must be connected to a power supply having the same voltage and phase as specified

on the rating plate located on the inside of the appliance door.

All wiring connections for this appliance must be made in accordance with the wiring diagram(s)

furnished with the appliance. Refer to the wiring diagram(s) affixed to the inside of the appliance door

Frymaster Dean appliances equipped with legs are for stationary installations. Appliances fitted with

legs must be lifted during movement to avoid damage to the appliance and bodily injury. For movable

installations, optional equipment casters must be used. Questions? Call 1-800-551-8633.

Single fryers must be restrained to prevent tipping when installed in order to avoid the splashing of

hot liquid. The means of restraint may be the manner of installation, such as connection to battery of

appliances or installing the fryer in an alcove, or by separate means, such as straps or chains.

Do not attach an apron drainboard to a single unit. The appliance may become unstable, tip over, and

cause injury. The appliance area must be free and clear of combustible material at all times.

SUPER RUNNER SERIES ELECTRIC FRYERS

CHAPTER 1: INSTALLATION INSTRUCTIONS

when installing or servicing this equipment.

. The information contained in the box concerns

NOTICE

wiring.

NOTICE

DANGER

1-1