HIKOKI WR14A Инструкция по обращению с предметами - Страница 10

Просмотреть онлайн или скачать pdf Инструкция по обращению с предметами для Ударный драйвер HIKOKI WR14A. HIKOKI WR14A 12 страниц.

Before using the tool for the first time

Prepare the compressed air connection.

Do not fit quick-lock couplings directly to the compressed air connection.

Never screw the enclosed connection pieces for quick-lock couplings directly onto the compressed air

connection. - simply screw the hose connection onto the device and then connect the compressed air

hose to this. The compressed air hose between the compressed air connection and a quick-lock

coupling must be at least 20 cm in length. If fitted too close to the device, a quick-lock coupling may fail:

whiplashing hoses can cause serious injury as a result.

- Screw the enclosed hose connection on the compressed air connection : using an openend spanner,

secure the compressed air connection against twisting and then screw on the hose connection with

another open-end spanner. See Fig. A.

- Fit the enclosed ear hose clamp onto the compressed air hose that you want to connect.

- Push the compressed air hose onto the hose connection as far as it will go.

- Slide the ear hose clamp onto the hose connection. Using a suitable pliers, pinch the ear (see Fig. B).

Air connection

Hose connection

Ear hose clamp

Air hose

Fig.A

Fig.B

Pinch the ears