HIKOKI WW8A Инструкция по обращению с предметами - Страница 4

Просмотреть онлайн или скачать pdf Инструкция по обращению с предметами для Ударный драйвер HIKOKI WW8A. HIKOKI WW8A 12 страниц.

The engery transmitted form the tool can vary depending on the size of

IMPORTANT

the air compressor and the volumn of air the air compressor delivers.

Do not use damaged, frayed or deteriorated air hoses and fitting.

●

Always disconnect air supply before lubricating, installing, removing or adjusting the tool.

●

When job is complete, turn the air compressor off and store as described in the air

●

compressor operator manual.

Always use clean, dry air at 90 PSI (6.2 bars) maximum air pressure. Dust, corrosive fumes

●

and/or excessive moisture can ruin the internal components of a pneumatic tool.

Do not remove any labels. Replac e a damaged label.

●

Keep hands, loose clothing and long hair away from the moving parts of tool.

●

GENERAL SAFETY TIPS FOR AIR TOOLS

- For multiple hazards, read and understand the safety instructions before installing,

operating, repairing, maintaining, changing accessories on, or working near the power tool.

Failure to do so can result in serious bo dily injury.

- Only qualified and trained operators should install, adjust or use the power tool.

- Do not modify this power tool. Modifications can reduce the effectiveness of safety

measures and increase the risks to the operator.

- Do not discard the sa fety instructions; give them to the operator.

- Do not use the power tool if it has been damaged.

- Tools shall be inspected periodically to verify that the ratings and markings are legibly

marked on the tool. The employer/user shall contact the manufactur er to obtain

replacement marking labels when necessary.

- In order to counteract the reaction torque and /or reduce the risk form the vibration, it is

recommended to fix the tool on a stable supporting device when working with the tool.

□

Projectile hazards

- Disconnect the power tool from the energy source when changing inserted tool or

accessories.

- Be aware that the failure of the workpiece, or accessories, or even of the inserted tool

itself can generate high -velocity projectiles.

- Always wear impact-resistant eye protection during the operation of the power tool. The

grade of protection required should be assessed for each use.

- The risk to others should also be accessed.

- Ensure that the workpiece is securely fixed.

Read the general safety tips and the safety tips related to

specific tools carefully for your own safety.

VII Page 4 of 15