Maircle S3-Mate Руководство пользователя - Страница 12

Просмотреть онлайн или скачать pdf Руководство пользователя для Пылесос Maircle S3-Mate. Maircle S3-Mate 14 страниц.

Печатать страницу
8
CLEANING A CLOG
CAUTION:
Low suction or vacuum failure caused by overheating may be due to a clog in the vacuum.
Please check and clear clogs in the dust cup, mesh shell, pre-motor filter, post-motor filter,
metal tube, and floor brush.
Cleaning a Clog
1
Check and empty the dust cup.
Check for clogs inside the
3
telescopic tube.
19
Check and rinse the HEPA filter
2
and sponge. Do not assemble
them until completely dry.
Check the floor brush and clear
4
the clogs with scissors.
9

TROUBLESHOOTING

PROBLEM
POSSIBLE REASONS
The used adapter is not the
The vacuum
original one
cannot be
The battery pack/adapter
charged
malfunctions
The battery runs out
The vacuum
The battery pack is not
cannot be
attached correctly
powered on
Other malfunctions
The battery has drained
The vacuum
The floor brush gets stuck
stops working
suddenly
1. The air duct is blocked
2. The dust cup is full
Other malfunctions
Incorrect use of the vacuum
The cleaning
results are not
The battery runs out
satisfactory
1.The air duct is blocked
2.The dust cup is full
The sponge is not
completely dry
There is too much dust
There is static
inside the dust cup
during
The vacuum runs with much
vacuuming
static
The floor brush gets stuck
The electric
floor brush
Other malfunctions
stops working
SOLUTIONS
Charge the vacuum with the original adapter.
Contact customer service for help.
Charge the vacuum with the original adapter.
Remove and reattach the battery pack and make
sure it is securely attached in place.
Contact customer service for help.
Use the original adapter for charging. It is
recommended to charge the vacuum after each
use, and use the low-suction mode for longer
runtime.
Clean foreign objects entangled on the floor
brush.
Clean the floor brush, tube, dust cup, and the
sponge regularly.
Contact customer service for help.
1. Use the high suction mode for cleaning
complicated environments.
2. Use the crevice tool for better pickup of
heavy objects such as beans.
3. Use the floor brush for cleaning stains.
Please charge the vacuum fully and try to turn
it on again.
Clean the floor brush, tube, dust cup and the
sponge regularly.
Detach and air dry the sponge completely. It is
recommended to clean and replace it regularly.
Empty the dust cup.
It's normal for there to be much static in the air
in winter and in dry regions.
Clean foreign objects entangled on the floor
brush.
Contact customer service for help.
20