Adeunis RF ARF45 Краткое руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Модем Adeunis RF ARF45. Adeunis RF ARF45 11 страниц. Wi-fi b/g modem

Then, when an exclamation point appears on the terminal or PC

screen, type xyz within 5 seconds to display the Command Line

Interface prompt.

From this point, the user is required to navigate onto the CLI (Please refer to

the Command set and User guide for more information) and perform the

following changes :

If no DHCP server is present on the network, the user must type

‐

the following commands (each followed by ENTER): enable, then

config, then if 2

Disable the DHCP client:

At that point the user must type dhcp disable in order to disable

the dhcp.

Enter a static IP address:

At that point the user must type ip address xxx.xxx.xxx.xxx in

order to enter a static IP address.

Save the changes: by typing write.

If the user cannot change the AP's settings, then he should modify

‐

the ARF45-Pro's WLAN settings : this comes down to change the

SSID name and possibly the security settings.

After having performed those changes the ARF45-Pro is up and running. So

the user can connect to the ARF45-Pro web server (refer to 1) for advanced

configuration.

In case the user does not have any Acces Point, then he can connect to the

web server by connecting to the Ad Hoc network created by the ARF45-PRO,

Lantronix Initial Adhoc Network.

which name is

Ref. 11-06-V3-ffr

RF45-PRO

Quick Start Guide

p 7