HIKVISION D0T Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности HIKVISION D0T. HIKVISION D0T 11 страниц. Audio turret camera
Также для HIKVISION D0T: Руководство пользователя (17 страниц), Руководство пользователя (17 страниц), Руководство пользователя (15 страниц), Руководство пользователя (11 страниц), Руководство пользователя (17 страниц)

Figure 2-3 Install the Camera to the Cement Ceiling

Note:

The supplied screw package contains self-tapping



screws, and expansion bolts.

4. Route the cables through the cable hole, or the side

opening.

5. Connect the corresponding power cord, and video

cable.

6. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

1). Loosen the P screw to adjust the pan position [0°

to 360°]. Tighten the screw after completing the

adjustment.

2). Loosen the T screw to adjust the tilt position [0°

to 180°]. Tighten the screw after completing the

adjustment.

3). Loosen the R screw and rotate the camera [0° to

360°]. Tighten the screw after completing the

adjustment.

2.1.2 Ceiling/Wall Mounting with Junction Box

Before you start:

You need to purchase a junction box in advance.

Steps:

1. Paste the drill template (supplied) to the place

where you want to install the camera.

2. Drill screw holes on the ceiling/wall according to the

drill template.

Figure 2-4 3-axis Adjustment

Figure 2-5 The Drill Template