HIKVISION D8T Series Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности HIKVISION D8T Series. HIKVISION D8T Series 17 страниц. Turbo hd turret camera
Также для HIKVISION D8T Series: Руководство пользователя (17 страниц), Руководство пользователя (17 страниц), Руководство пользователя (12 страниц), Руководство пользователя (16 страниц), Руководство пользователя (15 страниц), Руководство пользователя (12 страниц), Руководство пользователя (17 страниц)

Steps:

1. Paste the dill template to the ceiling.

2. Drill the screw holes and cable hole (optional) in the

ceiling according to the drill template.

Note:

Cable hole is required, when adopting the ceiling

outlet to route cables.

3. Disassemble the camera to remove the bubble.

4. Attach the back box of camera to the ceiling and

secure them with supplied screws.

Note:

The supplied screw package contains self-tapping



screws, and expansion bolts.

For cement ceiling, expansion bolts are required to



fix the camera. For wooden ceiling, self-tapping

screws are required.

5. Route the cables through the cable hole, or the side

opening.

6. Connect the corresponding cables, such as power

cord, and network cable.

7. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

Figure 2-15 Drill Template

Figure 2-16 Remove the Bubble

Figure 2-17 Attach the Back Box